 1.
 D.L. Banks, Four approaches to TREC data, TREC Conference,
NIST, November 1997.
 2.
 D.L. Banks, NAIVE: A postprocessor for network anomaly/intrusion
detectors, Symposium on Visualization and Testing in Intrusion Detection,
NIST, November, 1997.
 3.
 D.L. Banks, Strategies for superlarge datasets, NIST Seminar,
November, 1997.
 4.
 D.L. Banks, Issues in datamining,
University of Waterloo IIQP Colloquium Series, October, 1997.
 5.
 D.L. Banks, Mining superlarge datasets,
SRI Intrusion Detection Workshop, July 1997.
 6.
 D.L. Banks, Analysis of superlarge datasets, annual meeting
of the Classification Society of North America, June 1997.
 7.
 D.L. Banks, Preanalysis of superlarge superlarge datasets,
DIMACS Workshop, Rutgers University, May 1997.
 8.
 D.L. Banks, Problems in random number generation, DARPA Intrusion
Detection Workshop, February 1997.
 9.
 K.J Coakley,
Statistical Planning for Neutron Lifetime Experiment,
Technical Collaboration Meeting at
NIST, July 1997
 10.
 K.J Coakley,
Optimal Design of Neutron Lifetime Experiment,
Joint Meetings of American Statistical Society,
Anaheim, August 1997
 11.
 K.J Coakley,
Aerosol Concentration
in a New Spectrometer,
K.J.Coakley and
K.Ehara,
American Aerosol Association,
Denver, October, 1997.
 12.
 K.J Coakley,
Optimal Design of Neutron Lifetime Experiment,
Technical Collaboration Meeting at
Harvard University, October, 1996
 13.
 K.J Coakley,
Chaotic Behavior of Marginally Trapped Neutrons,
Technical Collaboration Meeting at
Harvard University, October, 1996
 14.
 C. Croarkin, ISO and NIST Uncertainty Policies,
Laser Measurements Workshop, Boulder, CO, Aug. 15, 1997.
 15.
 J.J. Filliben, (with K.G.W. Inn and Z. Lin),
Certification of the NIST Ocean Sediment SRM
Using Nonnormal Parametric Statistic Analysis,
Physics Laboratory Ionizing Radiation Division Seminar,
Gaithersburg, MD, February 25, 1997.
 16.
 J.J. Filliben,
Evaluation of Uncertainty in Scientific Measurement,
Advanced School of Metrology in Brazil: Evaluation of
Uncertainty in Measurement, Angra dos Reis, Brazil, March 3, 1997.
 17.
 J.J. Filliben and L.M. Gill,
Summary Analysis: Effect of Grinding Parameters on SRBSN, RBSN, and SSN,
NIST Ceramic Machining Consortium, 10th Program Review Meeting, Washington,
D.C., April 10, 1997.
 18.
 J.J. Filliben, C. Croarkin, W.G. Guthrie, A. Heckert,
(with P.A. Tobias, P.D. Spagon, B. Hembree, J. Prins, and C. Zey),
NIST/SEMATECH Engineering Statistics Handbook Demo,
14th Annual Statistical Methods Symposium,
San Antonio, TX, May 6, 1997.
 19.
 J.J. Filliben,
NIST/SEMATECH Engineering Statistics Handbook: Dataplot Highlights,
14th Annual Statistical Methods Symposium
SEMATECH Statistical Methods Advisory Council,
San Antonio, TX, May 7, 1997.
 20.
 J.J. Filliben,
Examples for Teaching Design of Experiments,
1997 Quality and Productivity Research Conference:
Design of Experiments and Industrial Statistics,
Orlando, FL, May 11, 1997.
 21.
 J.J. Filliben, W.G. Guthrie, A. Heckert,
Integration of Statistical Optimization Tools in Process/Product Design,
SIMA / HPCC Panel,
Gaithersburg, MD, July 18, 1997.
 22.
 J.J. Filliben, A. Heckert, M.G. Vangel,
Material Basis Values Within a Complete Statistics Package:
RECIPE (REgression Confidence Intervals for PErcentiles) in DATAPLOT.
Composite Materials Handbook (MILHDBK17) Coordination Meeting,
Williamsburg, VA, September 10, 1997.
 23.
 J.J. Filliben, C. Croarkin, W.G. Guthrie, A. Heckert, M. Reeder, J. Wang,
(with P.A. Tobias, P.D. Spagon, B. Hembree, J. Prins, and C. Zey),
NIST/SEMATECH OnLine Statistics Handbook for Engineers and Scientists,
American Statistical Association,
Anaheim, CA, August 10, 1997.
 24.
 J.J. Filliben, (with K.C. Li),
A Systematic Approach to the Analysis of Complex Interaction
Patterns in a 2Level Factorial Design,
Fall Technical Conference,
Baltimore, MD, October 17, 1997.
 25.
 J.J. Filliben, and A. Heckert,
An Overview of the Dataplot Graphics and EDA
Software System,
Washington Statistical Society,
Washington, D.C., December 10, 1997.
 26.
 J.J. Filliben,
Graphical Analysis of 2Factor Data,
Part of the 5Day Course: Analysis of Variance, by S.D. Leigh,
Statistics for Scientists Seminar Series,
Gaithersburg, MD, January 21, 1998.
 27.
 J.J. Filliben,
Graphical Analysis of 3Factor Data,
Part of the 5Day Course: Analysis of Variance, by S.D. Leigh,
Statistics for Scientists Seminar Series,
Gaithersburg, MD, February 4, 1998.
 28.
 J.J. Filliben,
Graphical Analysis of 4Factor Data,
Part of the 5Day Course: Analysis of Variance, by S.D. Leigh,
Statistics for Scientists Seminar Series,
Gaithersburg, MD, February 11, 1998.
 29.
 L.M. Gill, Navigating Through the Statistical Reference Dataset (StRD) Website,
Shaping Statistics for Success in the 21st Century, Joint Statistical Meetings '97, Anaheim,
CA, August 11, 1997.
 30.
 L.M. Gill, Summary Analysis: High Performance Ceramic Experiment to Characterize
the Effect of Grinding Parameters on Sintered Reaction Bonded Silicon Nitride, Reaction
Bonded Silicon Nitride, and Sintered Silicon Nitride, NIST Ceramic Machining Consortium,
10th Program Review Meeting, Washington, D.C., April 10, 1997.
 31.
 W.F. Guthrie, Selection and Certification of Reference Datasets for
Testing the Numerical Accuracy of Statistical Software for Linear Procedures,
NIST, Boulder, CO, September 26, 1997.
 32.
 W.F. Guthrie, NIST/SEMATECH Online Statistics Handbook for Engineers
and Scientists, Joint Statistical Meetings, Anaheim, CA, August 10, 1997.
 33.
 W.F. Guthrie, Selection and Certification of Reference Datasets for
Testing the Numerical Accuracy of Statistical Software for Linear Procedures,
Joint Statistical Meetings, Anaheim, CA, August 11, 1997.
 34.
 W.F. Guthrie, Selection and Certification of Reference Datasets for
Testing the Numerical Accuracy of Statistical Software for Linear Procedures,
NIST, Gaithersburg, MD, July 24, 1997.
 35.
 W.F. Guthrie, Demonstration of the NIST/SEMATECH Engineering Statistics
Handbook, SEMATECH Statistical Methods Symposium, San Antonio, TX, May 6,
1997.
 36.
 A. Heckert, (with E. Simiu), Wind Direction and HurricaneInduced
Ultimate Wind Loads,
Proceedings of the 2ND European and African Conference on
Wind Engineering, Genova, Italy, 6/97.
 37.
 E.S. Lagergren, A Comparison of Approaches for Robust Parameter
Design, Third U.S. Army Conference on Applied Statistics, George Mason
University, Fairfax, VA, October 24, 1997.
 38.
 E.S. Lagergren, Statistical Reference Datasets (StRD)  An Overview,
NIST, Boulder, CO, September, 26, 1997.
 39.
 E.S. Lagergren, Statistical Reference Datasets (StRD)  An Overview,
Joint Statistical Meetings, Anaheim, CA, August 11, 1997.
 40.
 E.S. Lagergren, Statistical Reference Datasets (StRD)  An Overview,
NIST, Gaithersburg, MD, July 24, 1997.
 41.
 M.S. Levenson, Spectral Methods for Data Analysis, NIST,
Gaithersburg, MD, June, 1997.
 42.
 M.S. Levenson, Spectral Methods for Data Analysis, NIST,
Boulder, CO, November, 1997.
 43.
 M.S. Levenson, Toolbox of Techniques for Uncertainty Analysis:
Uncertainty in Linear Calibration, Measurement Science Conference,
Pasadena, CA, February, 1998.
 44.
 M.S. Levenson, Case Studies from NIST: Radiometric Measurements,
Measurement Science Conference, Pasadena, CA, February, 1998.
 45.
 M.S. Levenson, Statistical Considerations in Calibration,
Baltimore Section of American Society for Quality, Baltimore,
MD, February, 1998.
 46.
 H.K. Liu, Highdimensional empirical linear prediction,
the 1997 Joint Statistical Meetings, August 12, 1996, Anaheim, CA.
 47.
 H.K. Liu, Quality assurance in DNA fingerprinting,
Fall Meeting of the Louisiana Chapter of the American Statistical Association,
October 24, 1997, New Orleans, LA.
 48.
 M.G. Vangel, MaximumLikelihood Estimation for a OneWay
Heteroscedastic ANOVA Model, With Applications to
Interlaboratory Studies, Joint Statistical Meetings,
Anaheim, CA, August, 1997.
 49.
 M.G. Vangel, Saddlepoint Approximations for the Joint
Distribution of the Mean and an Extremum, With Applications
to Quality Control, Army Conference on Applied Statistics,
Fairfax, VA, October, 1997.
 50.
 M.G. Vangel, Combining Information in Interlaboratory
Studies, Boston University, February, 1998.
 51.
 C.M. Wang, Fourth interlaboratory comparison of 10 V Josephson voltage
standards, National Conferences of Standards Laboratories
Workshop and Symposium, Atlanta, GA, July 2731, 1997.
 52.
 C.M. Wang, Robust regression applied to optical fiber dimensional
quality control, Joint Statistical Meetings, Anaheim, CA,
August 1014, 1997.
 53.
 N.F. Zhang, Combining Process Capability Indices, Joint Statistical
Meetings, Los Angles, CA, August 12, 1997
 54.
 N.F. Zhang, Statistical Quality Control and Its Applications in
Portfolio Risk Management,
Department of Statisitcs, Nanjing Institute of Economics, Nanjing,
China, June 3, 1997.
 55.
 N.F. Zhang, Statistical Control Charts for Stationary Process Data,
Department of Mathematical Statistics, East China Normal University,
May 28, 1997.
 56.
 N.F. Zhang, A Multivariate Control Chart for Stationary Process data,
International Symposium on Contemporary Multivariate Analysis and
Its Applications,
Hong Kong, May 20, 1997.
 57.
 N.F. Zhang, A Statistical Measure for the Sharpness of SEM Images,
SPIE's 22nd International Symposium on Microlithography, Santa Clara, CA,
March 11, 1997.
Date created: 7/20/2001
Last updated: 7/20/2001
Please email comments on this WWW page to
sedwww@nist.gov.
