Other NIST Projects
Admon, U., Dariel, M. P., Coakley, K., Guisuppetti, A. A., Hagwood, C., Lashmore, D. S. and Vangel, M. G. "Image analysis determination of the coating thickness on spherical powder particles," manuscript in preparation.
Admon, U, Dariel, M. P., Coakley, K., Giuseppetti, A. A.,Hagwood, C., Lashmore, D. S., and Vangel, M. G. (1995), "Image Analysis Determination of the Coating Thickness on Spherical Powder Particles," submitted, The Journal of Microscopy.
Capobianco, T. E. andVecchia, D. F. (1988). "Coil parameter influence on eddy current probe sensitivity," Review of Progress in Quantitative Nondestructive Evaluation, Volume 7A (D.O. Thompson and D.E. Chimenti, Eds.), Plenum Press, 487-492.
Eberhardt, K. R., Ohlemiller, T. J., Villa, K. M., Braun, E., Harris, Jr., R. H., Lawson, J. R. and Gann, R. G. (1993). "Test Methods for Quantifying the Propensity of Cigarettes to Ignite Soft Furnishings," NIST Special Publication 851, 166 pp.
Eberhardt, K. R.and Eliason, Lawrence K. (1992). "Limited Tests to Investigate Whether the Size of Body Armor Samples Influences Ballistic Test Results," NISTIR 4927, NIST Interagency Report prepared for National Institute of Justice, 24 + vi pp.
Eberhardt, K. R. (1988). "Statistical Analysis of Experiments to Measure Ignition Propensities of Cigarettes," Journal of the Washington Academy of Science.
Eberhardt, K. R., Leifer, R., Juzdan, Z. R., Kelly, W. R. and Fassett, J. D. (1987). "Detection of Uranium from Cosmos-1402 in the Stratosphere," Science, Vol. 238, pp. 512-514.
Ehara, K., Hagwood C. and Coakley, K. (1995). "Motion of charged aerosol particles under coexistence of electrostatic and centrifugal forces," to appear in Journal of Aerosol Research, Japan, Vol. 10, No. 1.
Hagwood, C., Coakley, K., Negiz, A. and Ehara, K. "Stochastic modeling of a new spectrometer," Submitted to the Journal of Aerosol Science and Technology.
Kingston, H. M., Greenberg, R. R., Beary, E. S., Hardas, B. R., Moody, J. R., Rains, T. C., and Liggett, W. S. (1983), "The Characterization of the Chesapeake Bay: A Systematic Analysis of Toxic Trace Elements," NBSIR 83-2698, National Bureau of Standards, Gaithersburg, MD.
Lechner, J. A. (1974). "Applying statistics in criminalistics." Proceedings of the 1974 Carnahan & International Crime Countermeasures Conf., pub. by U of KY: #UKYBU105.
Liggett, W. S., Moon, K. W., Handwerker, C. A., and Lagergren, E. S.(1995), "Solderability Measurement for Process Improvement Experiments." To be submitted.
Malitson, I. M. and Lechner, J. A. (1975). "Refractive index variance in auto headlamp glass." Crime Lab Digest 75-5, FBI, 8-10.
Martin, J. W., Guenther, F. R., Nguyen, T., Liggett, W. S., Byrd, E., and Oakley, L. (1994), "Source of Phenol Emissions Affecting the Indoor Air Quality of an Office Building," NISTIR 94-5353, National Institute of Standards and Technology, Building and Fire Research Laboratory, Gaithersburg, MD.
Martin, J. W., Lechner, J. A. and Varner, R. N. (1993). "Quantitative characterization of exterior weathering environments: UV-radiation." Accelerated and outdoor durability testing of organic materials, ASTM STP 1202.
Martin, Jonathan W., Embree, Edward, Stutzman, Paul E. and Lechner, J. A. (1990). "Strength and creep-rupture properties of adhesive-bonded EPDM joints stressed in peel." NIST Building Science Series 169.
Martin, Jonathan W., Waksman, David, Bentz, Dale P., Lechner, J. A. and Dickens, Brian (1984). "A preliminary stochastic model for servIce life prediction of photolytically and thermally degraded polymeric cover plate material." Proceedings of the Third International Conference on the Durability of Building Materials and Components, Finland.
Rossiter, W. J., Jr., Martin, J. W., Lechner, J. A., Embree, E. and Seiler, J. F., Jr. (1994). "Effect of adhesive thickness and surface cleanness on creep-rupture performance of EPDM peel and lap-shear joints." Roofing Research and Standards Development: 3rd Volume, ASTM STP 1224, American Society for Testing and Materials, Philadelphia, 1994. Also presented, slightly modified, to ASTM Committee D08 Third Symposium on Roofing Research and Standards Development, June 1994.
Rossiter, W., Martin, J. W., Lechner, J. A. and Seiler, J. E. (1992). "How to enhance EPDM's creep-rupture resistance." 1992 Annual Handbook of Commercial Roofing Systems, 17-22.
Rossiter, W. J., Nguyen, T., Byrd, W. E. , Seiler, J. F., Lechner, J. A., and Bailey, D. M. (1992). "Cleaning Aged EPDM Rubber Roofing Membrane Material for Patching: Laboratory Investigations and Recommendations." USACERL Technical Report FM-92/05, 54 p.
Rossiter, W. J., Nguyen, T., Byrd, W. E., Seiler, J. F. and Lechner, J. A. (1992). "Repairing aged EPDM roofing: the cleaner the sheet, the stronger the bond." Professional Roofing, 24-28.
Rossiter, W. J., Nguyen, T., Byrd, W. E., Seiler, J. J. and Lechner, J. A. (1991). "Cleaning of aged EPDM rubber roofing membrane material for patching: laboratory investigations and recommendations." NISTIR 4544.
Rossiter, W. J., Seiler, J. F., Spencer, W. P., Lechner, J. A. and Stutzman, P. E. (1991). "Characteristics of adhesive-bonded seams sampled from EPDM roof membranes." Proceedings of the Third International Symposium on Roofing Technology 4, 167- 179.
Scheinfein, M. R., Unguris, J., Blue, J. L., Coakley, K. J. and Ryan, P. J. (1991). "Micromagnetics of Domain Walls at Surfaces," Physical Review B, Vol. 43, No. 4, pp. 3395-3422.
Seiler, D. G., Harman, G. G., Lowney, J. R., Mayo, S., and Liggett, W. S. (1991), "HgCdTe Detector Reliability Study for the GOES Program," NISTIR 4687, National Institute of Standards and Technology, Electronics and Electrical Engineering Laboratory, Gaithersburg, MD.
Simiu, Emil; Reed, Dorothy A.; Yancey, Charles; W. C., Martin; Jonathan W.; Hendrickson, Erik M.; Gonzalez, Armando C.; Koike, Masayoshi; Lechner. J. A.; and Batts, Martin E. (1984). "Ring-on-ring tests and load capacity of cladding glass." NBS Building Science Series 162.
Date created: 6/5/2001