SED navigation bar go to SED home page go to Extreme Winds page go to NIST home page SED Home Page SED Staff SED Projects Extreme Winds Publications Search Wind Pages

windPRESSURE - Sample Pressure Files (HDF format)

windPRESSURE - Sample Pressure Files (HDF format) If for some reason you are unable to download or unpack the archive file containing the sample pressure files for the windPRESSURE software, you can individually download the files (HDF format).

Each individual file is approximately 8.6MB.

Description Results are provided from four tests conducted at the University of Western Ontario and results from three different wind directions are provided from each test. All models have the same roof slope of 1:12, length scaling of 1:100, width of W = 120 ft. (36.6 m), and length of L = 187.5 ft. (57.2 m), but the eave height and terrain conditions are different as follows:
  • eave height of H = 12 ft. (3.7 m), "open country" terrain
  • eave height of H = 18 ft. (5.5 m), "open country" terrain
  • eave height of H = 18 ft. (5.5 m), "Suburban" terrain
  • eave height of H = 24 ft. (7.3 m), "open country" terrain
H=12, Open The following files should be downloaded to the "H=12/open" sub-folder:
H=18, Open The following files should be downloaded to the "H=18/open" sub-folder:
H=18, Suburb The following files should be downloaded to the "H=18/suburb" sub-folder:
H=24, Open The following files should be downloaded to the "H=24/open" sub-folder:
SED Home |  Extreme Winds Home |  Wind Pressure Home ]

Privacy Policy/Security Notice
Disclaimer | FOIA

NIST is an agency of the U.S. Commerce Department.

Date created: 11/29/2005
Last updated: 10/03/2016
Please email comments on this WWW page to SED_webmaster@nist.gov